Filter
Top Products
Section 3: Operation
RPMSP & CSP70-D100U User’s Manual 3-3
.
The IR sensor on the projector will detect the signals and relay the commands for
internal processing. See Figure 3. 2.
You can convert the IR remote into a wired remote keypad using the cable provided
with the projector. Connect one end into the remote and the other to the mini stereo
connector on the input panel labeled as
REMOTE. The wired remote is recommended
when:
• the lighting conditions are unsuitable for proper IR transmission
• you want to use a separate keypad for each projector in a group
NOTE: Leave the batteries in the wired remote for the laser key ( ) to work.
Figure 3. 2.
Wired Remote '