Filter
Top Products
Section 3: Operation
RPMSP & CSP70-D100U User’s Manual 3-7
.
Function Key
IF WITHIN A MENU: Using the
Func
for special tasks within the menu system is noted
with the appropriate topic elsewhere in Section 3. For example, press
Func
in the
Channel Setup menu to enable deletion or copying of a channel.
IF WITHIN A PRESENTATION: Press
Func
followed by a 2-
digit number to enable a specific color or colors in the
display (see right). For example,
64
Func
will display
only red and green data,
67
Func
will display all color
data. Eliminating one or more colors can help with certain
diagnostics and setups, such as when accurately overlaying
one image on top of another when stacking projectors.
DEFINING OTHER USES: Through ASCII messaging on a PC, you can also create
special user functions for keys 1 – 5 and 7 – 9 and others. For example,
Func
can be
programmed to trigger RTEs (Real Time Events) or to display custom menus. Refer to
the separate Christie Serial Communications publication.
Projector
Press
Pro j
to access a specific projector within a group of projectors or to confirm if
the local projector is listening. The number in the “Enter Number” window indicates
which projector is currently listening to commands, and will match the projector
number that has been defined in the Menu Preferences menu.
The “Projector” checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To control a specific projector with the keypad, enter the 3-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are
currently using, the checkmark will disappear.
To broadcast to multiple linked projectors, press
Pro j
and then
Pro j
again without
entering a projector number. Keypad commands will then affect all projectors in the
chain.
NOTES: 1) The “Broadcast Keys” option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. See also 2.14 Remote Keypad Protocols
and Conversion, and 3.6, Adjusting System Parameters and Advanced Controls.
Enter
Press
to select a highlighted item, to toggle a checkbox, or to accept a parameter
adjustment and return to the previous menu or image.
Exit
Press
Exi t
to return to the previous level, such as the previous menu.
NOTE:
Exi t
does not save changes within text editing boxes (including number
editing of a slidebar value) or within pull-down lists. It acts as a “cancel” in these
cases.
Func
Pro j
Exi t