Filter
Top Products
Chapter 5 Troubleshooting the System Hardware
Symptoms and Solutions
5-32
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Two short
beeps
Information only, the configuration
has changed.
1. Run diagnostics.
2. Run the configuration/setup utility
program.
Three short
beeps
1. Check the DIMM.
2. Check the system board.
One
continuous
beep
1. Check the microprocessor.
2. Check the optional microprocessor (if
installed).
3. Check the system board.
Repeating
short beeps
This error pertains to keyboards, which are not
supported in Cisco ACNS software.
One long and
one short beep
This error pertains to video adapters, which are
not supported in the Wide Area Application
Engine 7326.
One long and
two short beeps
This error pertains to video adapters, which are
not supported in the Wide Area Application
Engine 7326.
One long and
three short
beeps
This error pertains to monitors or video
adapters. These items are not supported in the
Wide Area Application Engine 7326.
Two long and
two short beeps
This error pertains to video adapters, which are
not supported in the Wide Area Application
Engine 7326.
1. CMOS = Complementary Metal Oxide Semiconductor
2. DMA = Direct Memory Access
3. ACNS software does not support keyboards. No keyboard errors are expected; however, if a keyboard error appears during
bootup, contact the Cisco Technical Assistance Center.
Table 5-5 Beep Symptoms (continued)
Beep Symptom Error Cause and Action