Filter
Top Products
Chapter 4 Installing Hardware Options
Removing the Cover and Bezel
4-2
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Step 3 Press down on the left and right side latches and pull the device out of the rack
enclosure until both slide rails lock.
Note You can reach the cables on the back of the device when the device is in
the locked position.
Step 4 Lift the cover-release latch (labeled 2 in Figure 4-1). Lift the cover off the device
and set the cover aside.
Figure 4-1 Removing the Cover and Bezel
1 Bezel 2 Cover release latch
83237
1 2