Filter
Top Products
Chapter 3 Installing the Wide Area Application Engine
Installing the Wide Area Application Engine 7326
3-6
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Step 2 Align the slide rail with the front mounting flange. Use the score mark on the slide
rail (labeled 1 in Figure 3-3) to align the slide rail. Push outward on the slide rail
latch to close the latch and secure the slide rail. Do the same for the front of the
other slide rail. Align the slide rail with the rear mounting flange. The slide rail
occupies the full height of the device. Close the latches to secure the rear of both
the slide rails.
Note Make sure that the slide rails are securely seated on the mounting flanges.
When the slide is secure, the slide rail pins protrude from the slide rails.
Figure 3-3 Aligning the Slide Rails
Step 3
Extend the slide rails fully from the rack until the slide rails lock. Align the tabs
on the slide rails (labeled 1 in Figure 3-4) with the matching inserts on the
appliance and lower the appliance onto the slide rails.
1 Right slide rail 2 Slide rail latch
1 Slide rail score mark 2 Slide rail pins
134571
1
2