Filter
Top Products
4-1
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
CHAPTER
4
Installing Hardware Options
This chapter provides basic instructions for installing hardware options in your
Wide Area Application Engine (WAE). These instructions are intended for
technicians who are experienced with setting up Cisco WAE hardware.
This chapter contains the following sections:
• Removing the Cover and Bezel, page 4-1
• Working with Adapters, page 4-3
• Completing the Installation, page 4-11
• Installing a Hard Disk Drive, page 4-13
Removing the Cover and Bezel
Warning
Before working on a system that has an on/off switch, turn OFF the power and
unplug the power cord.
Statement 1
To remove the device top cover, follow these steps:
Step 1 Review the information in the “Safety Warnings” section on page 2-1 and the
“Safety Guidelines” section on page 2-4.
Step 2 Power off the device and all attached devices and disconnect all external cables
and power cords.