Filter
Top Products
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
1-12
Csico Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Figure 1-5 Back Panel Connectors and LEDs
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits
to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits,
and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45
connectors. Use caution when connecting cables.
Statement 1021
Ethernet Port Connectors
Connect a Category 3, 4, or 5 unshielded twisted-pair cable to this connector.
100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or
higher cabling.
1 Ethernet connector 7 Power cord connector and LED
2 Ethernet connector 8 USB connectors (not supported)
3 System locator LED 9 Video connector (not supported)
4 ASM connector (not supported) 10 Mouse connector (not supported)
5 Remote Supervisor Adapter II connector (not
supported)
11 Keyboard connector (not supported)
6 SCSI connector 12 Serial port connector
TX/RX TX/RXLINK LINK
137693
3
2
1
4 5 6 7
89101112