1-15
Csico Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
simultaneously. SCSI devices that are connected to different SCSI channels can
have duplicate SCSI IDs. Table 1-5 lists the SCSI IDs for the hard disk drives and
backplanes that are connected to one channel.
Figure 1-8 shows a connector that conforms to the SCSI standard.
Figure 1-8 SCSI Connector
Fibre Channel Connector
The Fibre Channel connector is an LC-style connector that supports non-OFC,
multimode fiber-optic cabling using a small form factor (SFF) fiber-optic
transceiver module. The Fibre Channel adapter uses LC-LC Fibre Channel cables.
Total cable length cannot exceed 1640 feet (500 meters). Fibre Channel cables are
not supplied by Cisco Systems.
Table 1-5 SCSI IDs
Device SCSI ID
Drive bay 1 0
Drive bay 2 1
Drive bay 3 2
Drive bay 4 3
Drive bay 5 4
Drive bay 6 5
Controller 7
Backplane 8
34
1
68
35
83192