Filter
Top Products
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
1-18
Csico Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Ports and LED Indicators
Figure 1-10 shows the inline network adapter port numbers, interface
designations, and LEDs. Table 1-6 describes the LED functions.
Figure 1-10 Inline Network Adapter Port Numbering and LEDs
The inline network adapter has three LEDs that correspond to each port (the 0
LEDs correspond to Port 0, and so forth). Table 1-6 describes the LEDs.
0 Port 0; Group 1 WAN interface 1 Port 1; Group 1 LAN interface
2 Port 2; Group 0 WAN interface 3 Port 3: Group 0 LAN interface
0 1 2 3
LINK/ACT
100
1000
BYPAS
S
0 1 2 3
Table 1-6 Inline Network Adapter LEDs
LEDs State Description
Link / Activity On The 10/100/1000BASE-T interface is receiving power.
Blinking The Ethernet link is transmitting data.
100 On The speed of the Ethernet connection is 100BASE-TX.
1000 On The speed of the Ethernet connection is 1000BASE-TX.
Bypass Both the 100 and
1000 LEDs are
on
The corresponding ports are in mechanical bypass mode.