Filter
Top Products
4-11
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Chapter 4 Installing Hardware Options
Completing the Installation
For instructions on completing the installation, see the “Completing the
Installation” section on page 4-11.
Completing the Installation
To complete your installation, follow these steps:
Step 1 Install the top cover.
Step 2 Install the device in a rack.
For complete rack installation and removal instructions, see Chapter 3, “Installing
the Wide Area Application Engine.”
Caution Install the device only in a rack cabinet with perforated doors.
Caution Do not leave open spaces above or below an installed server in the rack cabinet.
To help prevent damage to server components, always install a blank filler panel
to cover the open space and to help ensure proper air circulation. See the
documentation that comes with your rack cabinet for more information.
Step 3 Connect the cables and power cords. For information on connecting cables and
power cords, see the “Connecting Cables” section on page 3-12.