Filter
Top Products
Chapter 4 Installing Hardware Options
Completing the Installation
4-12
Cisco Wide Area Application Engine 7326 Hardware Installation Guide
OL-6831-02
Installing the WAE Cover and Bezel
To install the WAE cover and bezel, follow these steps:
Step 1 Place the cover release latch (labeled 2 in Figure 4-7) in the open (up) position.
Step 2 Insert the bottom tabs of the top cover into the matching slots in the device
chassis.
Step 3 Press down on the cover release latch to lock the cover in place.
Figure 4-7 Installing the Cover and Bezel
Step 4
Install the bezel.
a. Align the hooks on the bottom of the bezel with the device.
1 Bezel 2 Cover release latch
83237
1 2