Cisco Systems OL-6244-01 Switch User Manual


  Open as PDF
of 1438
 
2-995
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show module
show module
To display module status and information, use the show module command. For supervisor engines, the
show module command displays the supervisor engine number but appends the uplink daughter card
module type and information.
show module [mod]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a module number, all modules are shown.
The MAC addresses for the supervisor engine are displayed in three lines of output. The first line lists
the two MAC addresses for inband ports, the second line lists the two MAC addresses for the two
gigabit-uplink ports, and the third line lists the allocated 0x3ff MAC address for the chassis backplane.
If you place the MSFC on a supervisor engine installed in slot 1, then the MSFC is recognized as
module 15. If you install the supervisor engine in slot 2, the MSFC is recognized as module 16.
The slot field in the show module command display is required because submodules, such as the MSM,
reside in the same slot as the supervisor engine module, but are treated as a separate module.
The MSM is referenced by the module number in all other CLI commands and is treated like any other
module.
The show module command does not display information about the 720 Gbps integrated switch fabric
because it is not a separate module.
Examples This example shows how to display status and information for all modules:
Console> show module
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok
8 8 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
9 9 48 10/100BaseTX Ethernet WS-X6348-RJ-45 yes ok
Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD03436055
15 SAD03432597
9 SAD03414268
mod (Optional) Number of the module.