Filter
Top Products
2-1039
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port auxiliaryvlan
This example shows how to display the status of the switch that does not send any auxiliary VLAN
information in the CDP packets:
Console> (enable) show port auxiliaryvlan none
AuxiliaryVlan Status Mod/Ports
------------- -------- ------------------------------------------------------
none none 8/1-3,8/8-12,8/19-22,8/24-30,8/35-48,9/1-11,9/13-48
Console> (enable)
This example shows how to display the status of the Cisco IP Phone 7960 that sends untagged packets
without 802.1p priority:
Console> (enable) show port auxiliaryvlan untagged
AuxiliaryVlan Status Mod/Ports
------------- -------- ------------------------------------------------------
untagged untagged 9/12
Console> (enable)
This example shows how to display the status of the Cisco IP Phone 7960 that sends packets with 802.1p
priority:
Console> (enable) show port auxiliaryvlan dot1p
AuxiliaryVlan Status Mod/Ports
------------- -------- ------------------------------------------------------
dot1p dot1p 8/23,8/31-34
Console> (enable)
Table 2-69 describes the possible fields (depending on the port type queried) in the show port
auxiliaryvlan command output.
Related Commands set port auxiliaryvlan
Table 2-69 show port auxiliaryvlan Command Output Fields
Field Description
AuxiliaryVlan Number of the auxiliary VLAN.
AuxVlanStatus Status of the auxiliary VLAN.
Mod/Ports Number of the module and ports assigned to the auxiliary VLAN.