Filter
Top Products
2-1125
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show pvlan capability
show pvlan capability
To determine whether or not a port can be made a private port, use the show pvlan capability
command.
show pvlan capability mod/port
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to determine if a port can be made into a private VLAN:
Console> (enable) show pvlan capability 5/20
Ports 5/13 - 5/24 are in the same ASIC range as port 5/20.
Port 5/20 can be made a private vlan port.
Console> (enable)
These examples show the output if a port cannot be made into a private VLAN:
Console> (enable) show pvlan capability 3/1
Port 3/1 cannot be made a private vlan port due to:
------------------------------------------------------
Promiscuous ports cannot be made private vlan ports.
Console> (enable)
Console> (enable) show pvlan capability 5/1
Ports 5/1 - 5/12 are in the same ASIC range as port 5/1.
Port 5/1 cannot be made a private vlan port due to:
------------------------------------------------------
Trunking ports are not Private Vlan capable.
Conflict with Promiscuous port(s) : 5/2
Console> (enable)
Console> (enable) show pvlan capability 5/2
Ports 5/1 - 5/12 are in the same ASIC range as port 5/2.
Port 5/2 cannot be made a private vlan port due to:
------------------------------------------------------
Promiscuous ports cannot be made private vlan ports.
Conflict with Trunking port(s) : 5/1
Console> (enable)
mod/port Number of the module and the port on the module.