Filter
Top Products
2-926
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show l2protocol-tunnel statistics
show l2protocol-tunnel statistics
To display Layer 2 protocol tunneling statistics for a port or range or ports, use the show
l2protocol-tunnel statistics command.
show l2protocol-tunnel statistics [mod[/port]]
show l2protocol-tunnel statistics mod/port vlan vlan
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a module and a port or range of ports, Layer 2 protocol tunneling statistics are
displayed for all tunneling ports. If you only specify a module, Layer 2 protocol tunneling statistics are
displayed for all tunneling ports on the module.
If you want to specify a VLAN, you must also specify a module number and a port number.
Examples This example shows how to display Layer 2 protocol tunneling statistics for a range of ports:
Console> show l2protocol-tunnel statistics 7/1-2
Tunneling CoS is set to 5.
Port CDP Frames Encap CDP Frames De-encap
------------------------ -------------------- --------------------
7/1 2 2
7/2 2 2
Port STP Frames Encap STP Frames De-encap
------------------------ -------------------- --------------------
7/1 0 0
7/2 0 0
Port VTP Frames Encap VTP Frames De-encap
------------------------ -------------------- --------------------
7/1 0 0
7/2 0 0
Console>
mod[/port] (Optional) Number of the module and the number of the port or range of ports on
the module. See the “Usage Guidelines” section for more information.
vlan Displays Layer 2 protocol tunneling statistics on a VLAN. See the “Usage
Guidelines” section for more information.
vlan VLAN number.