Filter
Top Products
2-1272
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show tacacs
show tacacs
To display the TACACS+ protocol configuration, use the show tacacs command.
show tacacs [noalias]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display the TACACS+ protocol configuration:
Console> show tacacs
Login Authentication: Console Session Telnet Session
--------------------- ---------------- ----------------
tacacs disabled disabled
local enabled(primary) enabled(primary)
Enable Authentication:Console Session Telnet Session
---------------------- ----------------- ----------------
tacacs disabled disabled
local enabled(primary) enabled(primary)
Tacacs login attempts:3
Tacacs timeout:5 seconds
Tacacs direct request:disabled
Tacacs-Server Status
---------------------------------------- -------
171.69.193.114 primary
Console>
Table 2-104 describes the fields in the show tacacs command output.
noalias (Optional) Forces the display to show IP addresses, not IP aliases.
Table 2-104 show tacacs Command Output Fields
Field Description
Login authentication Display of the login authentication types.
Console Session Status of whether the console session is enabled or disabled.
Telnet Session Status of whether the Telnet session is enabled or disabled.
Enable Authentication Display of the enable authentication types.
Tacacs login attempts Number of failed login attempts allowed.