Filter
Top Products
2-1106
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port voice
show port voice
To display voice port information, use the show port voice command.
show port voice [noalias]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines This command is not supported by the NAM.
Examples This example shows how to display voice port information:
Console> show port voice
Port Name Status Vlan Duplex Speed Type
----- ------------------ ---------- ---------- ------ ----- ------------
7/1 connected 100 full 1 T1
7/2 notconnect 100 full 1 T1
7/3 connected 100 full 1 T1
7/4 connected 100 full 1 T1
7/5 notconnect 100 full 1 T1
Port DHCP MAC-Address IP-Address Subnet-Mask
-------- ------- ----------------- --------------- ---------------
7/1 disable 00-e0-b0-ff-31-c0 sjcf-12a-sw1-p7 255.255.254.0
7/2 disable 00-e0-b0-ff-31-c1 sjcf-12a-sw1-p7 255.255.254.0
7/3 disable 00-e0-b0-ff-31-c2 sjcf-12a-sw1-p7 255.255.254.0
7/4 disable 00-e0-b0-ff-31-c3 sjcf-12a-sw1-p7 255.255.254.0
7/5 disable 00-e0-b0-ff-31-c4 sjcf-12a-sw1-p7 255.255.254.0
Port Call-Manager(s) DHCP-Server TFTP-Server Gateway
-------- ----------------- --------------- --------------- ---------------
7/1 gigantic-2.cisc* - 10.34.1.11 10.34.10.1
10.34.1.11
7/2 10.34.16.10* - 10.34.1.11 10.34.10.1
10.34.1.11
7/3 10.34.16.10* - 10.34.1.11 10.34.10.1
10.34.1.11
7/4 10.34.16.10* - 10.34.1.11 10.34.10.1
10.34.1.11
7/5 10.34.1.11* - 10.34.1.11 10.34.10.1
10.34.16.10
10.34.42.11
(*):Primary
noalias (Optional) Forces the display to show IP addresses, not IP aliases.