Filter
Top Products
2-945
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show logging callhome
show logging callhome
To display the configured CallHome settings, use the show logging callhome command.
show logging callhome
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display the configured CallHome settings:
Console> (enable) show logging callhome
Callhome Functionality: enabled
Callhome Severity: LOG_ERR(3)
SMTP Server
-----------
172.20.8.16
Destination Address Message Size
------------------- ------------
adminboss@cisco.com No Fragmentation
adminjane@cisco.com No Fragmentation
adminjoe@epage.cisco 128 bytes
From: adminjoe@cisco.com
Reply-To: adminjane@cisco.com
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
Console> (enable)
Table 2-46 describes the fields in the show logging callhome command output.
Table 2-46 show logging callhome Command Output Fields
Field Description
CallHome functionality Current setting of CallHome.
CallHome Severity Severity level at which point syslog messages are sent to specified
destination addresses.
SMTP Server IP address of SMTP server(s) specified for CallHome.
Destination Address E-mail or pager e-mail addresses for all recipients set to receive
syslog messages.
Message Size Message fragment size specified for each Destination Address.