Filter
Top Products
2-731
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set summertime
set summertime
To specify whether the system should set the clock ahead one hour during daylight saving time, use the
set summertime command.
set summertime {enable | disable} [zone]
set summertime recurring [{week} {day} {month} {hh:mm} {week | day | month | hh:mm} [offset]]
set summertime date {month} {date} {year} {hh:mm} {month | date | year | hh:mm}
[offset]
Syntax Description
Defaults By default, the set summertime command is disabled. Once enabled, the default for offset is 60 minutes,
following U.S. standards.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines After you enter the clear config command, the dates and times are set to default.
Unless you configure it otherwise, this command advances the clock one hour at 2:00 a.m. on the first
Sunday in April and moves back the clock one hour at 2:00 a.m. on the last Sunday in October.
Examples This example shows how to cause the system to set the clock ahead one hour during daylight saving time:
Console> (enable) set summertime enable PDT
Summertime is enabled and set to “PDT”.
Console> (enable)
enable Causes the system to set the clock ahead one hour during daylight saving time.
disable Prevents the system from setting the clock ahead one hour during daylight saving time.
zone (Optional) Time zone used by the set summertime command.
recurring Specifies the summertime dates that recur every year.
week (Optional) Week of the month (first, second, third, fourth, last, 1...5).
day (Optional) Day of the week (Sunday, Monday, Tuesday, and so forth).
month Month of the year (January, February, March, and so forth).
hh:mm Hours and minutes.
offset (Optional) Amount of offset in minutes (from 1 to 1440 minutes).
date Day of the month ( from 1 to 31).
year Number of the year ( from 1993 to 2035).