Filter
Top Products
2-1071
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port flowcontrol
Table 2-76 describes the fields in the show port flowcontrol command output.
Related Commands set port flowcontrol
Table 2-76 show port flowcontrol Command Output Fields
Field Description
Port Module and port number.
Send Flowcontrol
Admin
Flow-control administration. Possible settings: on indicates the local port
sends flow control to the far end; off indicates the local port does not send
flow control to the far end; desired indicates the local end sends flow
control to the far end if the far end supports it.
Send Flowcontrol
Oper
Flow-control operation. Possible setting: on indicates flow control is
operational; off indicates flow control is not operational; disagree indicates
the two ports could not agree on a link protocol.
Receive Flowcntl
Admin
Flow-control administration. Possible settings: on indicates the local port
requires the far end to send flow control; off indicates the local port does
not allow the far end to send flow control; desired indicates the local end
allows the far end to send flow control.
Receive Flowcntl
Oper
Flow-control operation. Possible setting: on indicates flow control is
operational; off indicates flow control is not operational; disagree indicates
the two ports could not agree on a link protocol.
RxPause Number of Pause frames received.
TxPause Number of Pause frames transmitted.