Filter
Top Products
2-1110
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port voice active
Examples This example shows how to display all calls (regular calls, conference calls, and transcoding calls) in the
system:
Console> show port voice active
Port Type Total Conference-ID/ Party-ID IP-Address
Transcoding-ID
----- ------------ ----- -------------- -------- ---------------
6/3 transcoding 1 2 12 192.1.1.12
10 10.6.106.101
8/2 call 1 - - 123.46.1.100
8/5 call 1 - - 123.46.1.101
8/7 conferencing 1 1 8 192.1.1.5
7 123.45.1.52
9 192.1.1.14
Total: 3
Console> (enable)
This example shows how to display regular calls:
Console> (enable) show port voice active call
Port Total IP-Address
----- ----- ---------------
8/2 1 123.46.1.100
8/5 1 123.46.1.101
Total: 2 calls
Console> (enable)
This example shows the output display for the 8-port T1/E1 PSTN interface module configured for
transcoding:
Console> (enable) show port voice active transcode
Port Total Transcoding-ID Party-ID IP-Address
----- ----- -------------- -------- ---------------
6/3 1 2 12 192.1.1.12
10 10.6.106.101
Total: 1 transcoding session
Console> (enable)
This example shows the output display for the 8-port T1/E1 PSTN interface module configured for
conferencing:
Console> (enable) show port voice active conference
Port Total Conference-ID Party-ID IP-Address
----- ----- -------------- -------- ---------------
8/7 1 1 8 192.1.1.5
7 123.45.1.52
9 192.1.1.14
Total: 1 conferencing session
Console> (enable)
This example shows how to display calls for a specified port:
Console> show port voice active 3/2
Port 3/2:
Channel #1:
Remote IP address : 165.34.234.111
Remote UDP port : 124
Call state : Ringing
Codec Type : G.711
Coder Type Rate : 35243
Tx duration : 438543 sec
Voice Tx duration : 34534 sec
ACOM Level Current : 123213
ERL Level : 123 dB