Cisco Systems OL-6244-01 Switch User Manual


  Open as PDF
of 1438
 
2-386
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging callhome
set logging callhome
To enable or disable the CallHome feature, use the set logging callhome command.
set logging callhome {enable | disable}
Syntax Description
Defaults CallHome functionality is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you disable CallHome, only CallHome functionality is affected. To disable a specific parameter, you
must clear each parameter individually.
Examples This example shows how to enable the CallHome functionality:
Console> (enable) set logging callhome enable
Callhome functionality is enabled.
Callhome messages will be sent to the configured destination addresses.
Console> (enable)
This example shows how to disable the CallHome functionality:
Console> (enable) set logging callhome disable
Callhome functionality is disabled.
Callhome messages will not be sent to the configured destination addresses.
Console> (enable)
Related Commands clear logging callhome
clear logging callhome from
clear logging callhome reply-to
clear logging callhome severity
clear logging callhome smtp-server
set logging callhome destination
set logging callhome from
set logging callhome reply-to
set logging callhome severity
set logging callhome smtp-server
show logging callhome
show logging callhome destination
enable Enables CallHome functionality.
disable Disables CallHome functionality.