Filter
Top Products
2-643
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set snmp access
set snmp access
To define the access rights of an SNMP group, use the set snmp access command.
set snmp access [-hex] {groupname} {security-model {v1 | v2c}}
[read [-hex] {readview}] [write [-hex] {writeview}] [notify [-hex] {notifyview}]
[volatile | nonvolatile]
set snmp access [-hex] {groupname} {security-model v3 {noauthentication |
authentication | privacy}} [read [-hex] {readview}] [write [-hex] {writeview}]
[notify [-hex] {notifyview}] [context [-hex] contextname [exact | prefix]] [volatile |
nonvolatile]
Syntax Description
Defaults The defaults are as follows:
• storage type is nonvolatile.
• read readview is Internet OID space.
• write writeview is NULL OID.
-hex (Optional) Displays the groupname, readview, writeview, notifyview, and
contextname in a hexadecimal format.
groupname Name of the SNMP group.
security-model v1 |
v2c
Specifies security-model v1 or v2c.
read readview (Optional) Specifies the name of the view that allows you to see the MIB
objects.
write writeview (Optional) Specifies the name of the view that allows you to configure the
contents of the agent.
notify notifyview (Optional) Specifies the name of the view that allows you to send a trap about
MIB objects.
v3 Specifies security model v3.
noauthentication Specifies security model is not set to use authentication protocol.
authentication Specifies the type of authentication protocol.
privacy Specifies the messages sent on behalf of the user are protected from
disclosure.
volatile (Optional) Specifies that the storage type is defined as temporary memory and
the content is deleted if the device is turned off.
nonvolatile (Optional) Specifies that the storage type is defined as persistent memory and
the content remains after the device is turned off and on again.
context contextname (Optional) Specifies the name of the context string and the way to match the
context string; maximum of 32 characters.
exact (Optional) Specifies that an exact match between the contextname and the
value of vacmAccessContextPrefix is required to select this entry.
prefix (Optional) Specifies that only a match between vacmAccessContextPrefix
and the starting portion of contextname is required to select this entry.