Filter
Top Products
2-795
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show accounting
Overall Accounting Traffic:
Starts Stops Active
Exec 1 0 2
Connect 0 0 1
Command 0 0 0
System 0 0 0
Console> (enable)
This example shows the configuration details of a switch with TACACS+ accounting enabled:
Console> (enable) show accounting
TACACS+:
Update: periodic (25 seconds)
Supress: disabled
Status Mode
-------- -----------
exec: disabled stop-only
connect: disabled stop-only
system: disabled stop-only
network: disabled stop-only
commands:
config: disabled stop-only
all: disabled stop-only
Radius:
Status Mode
-------- -----------
exec: disabled stop-only
connect: disabled stop-only
system: disabled stop-only
TACACS+ Suppress for no username: disabled
Update Frequency: newinfo
Accounting information:
-----------------------
Active Accounted actions on tty2168059284l, User NULL Priv 15
Task ID 3, EXEC Accounting record, 0,00:00:22 Elapsed
task_id=3 start_time=934463479 timezone=UTC service=shell
Active Accounted actions on tty0l, User kannank Priv 15
Task ID 2, EXEC Accounting record, 0,00:01:23 Elapsed
task_id=2 start_time=934463418 timezone=UTC service=shell
Active Accounted actions on tty2168059284l, User danny Priv 15
Task ID 4, Connection Accounting record, 0,00:00:07 Elapsed
task_id=4 start_time=934463495 timezone=UTC service=connection protocol=telnet
addr=-1407968771 cmd=telnet 172.20.25.253
Overall Accounting Traffic:
Starts Stops Active
Exec 1 0 2
Connect 0 0 1
Command 0 0 0
System 0 0 0
Console> (enable)