Filter
Top Products
2-1199
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show snmp group
The SNMP functionality on the Catalyst enterprise LAN switches for SNMP v1 and SNMP v2c remains
intact; however, the functionality has greatly expanded for SNMPv3. Refer to the “Configuring SNMP”
chapter of the Catalyst 6500 Series Switch Software Configuration Guide for more information on
SNMPv3.
The read-only keyword is supported for security model v3 only.
Examples This example shows how to display the SNMP group:
Console> (enable) show snmp group
Security Model: v1
Security Name: public
Group Name: defaultROgroup
Storage Type: volatile
Row Status: active
Security Model: v1
Security Name: secret
Group Name: defaultRWALLgroup
Storage Type: volatile
Row Status: active
Security Model: v1
Security Name: private
Group Name: defaultRWgroup
Storage Type: volatile
Row Status: active
Security Model: v2c
Security Name: public
Group Name: defaultROgroup
Storage Type: volatile
Row Status: active
Console> (enable)
Table 2-90 describes the fields in the show snmp group command output.
Related Commands clear snmp group
set snmp group
Table 2-90 show snmp group Command Output Fields
Field Description
Security Model Security model used by the group.
Security Name Security string definition.
Group Name Name of the SNMP group or collection of users who have a
common access policy.
Storage Type Indicates whether the settings are volatile or nonvolatile.
Row Status Status of the entry.