Filter
Top Products
2-815
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show cam notification
This example shows how to display CAM notification information for ports 1-6 on module 2:
Console> show cam notification 2/1-6
Mod/Port Added Removed
--------- -------- --------
2/1 enabled disabled
2/2 enabled disabled
2/3 enabled enabled
2/4 enabled enabled
2/5 disabled enabled
2/6 disabled enabled
Console>
This example shows how to display CAM notification intervals:
Console> show cam notification interval
CAM notification interval = 10 second(s).
Console>
This example shows how to display CAM notification history information:
Console> show cam notification history
Index Timestamp Operation Address Vlan Mod/Port
===============================================================================
4 16676708 Unlearned 00:00:00:00:00:64 2 2/6
Unlearned 00:00:00:00:00:63 2 2/6
Unlearned 00:00:00:00:00:62 2 2/6
Learned 00:00:00:00:00:61 2 2/4
Learned 00:00:00:00:00:60 2 2/4
Unlearned 00:00:00:00:00:5f 2 2/4
Unlearned 00:00:00:00:00:5e 2 2/5
5 16697903 Learned 00:00:00:00:00:1a 1 2/1
Console>
This example shows how to display CAM notification history size information:
Console> show cam notification historysize
MAC address change history log size = 300
Console>
This example shows how to display CAM notification configuration information:
Console> show cam notification all
MAC address change detection enabled
CAM notification interval = 15 second(s).
MAC address change history log size = 1
MAC addresses added = 22936547
MAC addresses removed = 262132
MAC addresses added overflowed = 0
MAC addresses removed overflowed = 0
MAC address SNMP traps generated = 0
MAC address move notification disabled
CAM notification threshold disabled
CAM notification threshold limit = 100%
CAM notification threshold interval = 120 seconds
Console>