Filter
Top Products
CHAPTER 8: DEBUGGER
138 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
8.7.2 Executing from Menu or Tool Bar
The menu and tool bar are assigned frequently-used commands as described in Sections 8.5 and 8.6. A
command can be executed simply by selecting desired menu command or clicking on the tool bar button.
Table 8.7.2.1 lists the commands assigned to the menu and tool bar.
Table 8.7.2.1 Commands that can be specified from menu or tool bar
Command Function Menu Button
lf Load IEEE-695 absolute object file [File | Load File...]
lo Load Motorola-S file [File | Load Option...]
g Execute program successively [Run | Go]
g <address> Execute program to <address> successively [Run | Go to Cursor]
gr
Reset CPU and execute program successively
[Run | Go from Reset]
s Step into [Run | Step]
n Step over [Run | Next]
com, cmw Load and execute command file [Run | Command File...] –
rst Reset CPU [Run | Reset CPU]
bp, bc (bpc) Set/clear PC breakpoint [Break | Breakpoint Set...]
bd, bdc Set/clear data break [Break | Data Break...] –
br, brc Set/clear register break [Break | Register Break...] –
bs, bsc Set/clear sequential break [Break | Sequential Break...] –
bsp Set stack break [Break | Stack Break...] –
bl Break list [Break | Break List...] –
bac Clear all break conditions [Break | Break All Clear] –
tm Set trace mode [Trace | Trace Mode Set...] –
ts Search trace information [Trace | Trace Search...] –
tf Save trace information to a file [Trace | Trace File...] –
u Unassemble display [View | Program | Unassemble]
sc Source display [View | Program | Source Display]
m Mix display [View | Program | Mix Mode]
lfl Load from flash memory [File | Flash Memory Operation...] –
sfl Save to flash memory [File | Flash Memory Operation...] –
efl Erase flash memory [File | Flash Memory Operation...] –
dd Dump data memory [View | Data Dump] –
rd Display register values [View | Register] –
td Display trace information [View | Trace] –
log Turn log output on or off [Option | Log...] –
rec Record commands to a command file [Option | Record...] –
md
Set modes [Option | Mode Setting...] –