Filter
Top Products
CHAPTER 10: SEGMENT OPTION GENERATOR
254 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
10.3.5 Operation Procedure
The following shows the basic operation procedure.
(1) Loading the device information definition file
First, select a device information definition file (s1c63xxx.ini) and load it.
Select [Device INI Select] from the [Tool] menu or click the [Device INI Select] button.
[Device INI Select] button
The dialog box shown below appears. Enter a file name including the path in the text box or select a
file by clicking the [Ref] button.
Click [OK], and the file is loaded. If the
specified file exists and there is no problem
with its contents, the set-up items in winsog
are initialized with the loaded device
information.
To stop loading the file, click [Cancel].
10.3.4 Option Selection Buttons
The following buttons are available in the option setup area.
OUTPUT Option buttons
These buttons select SEG pin output modes. These buttons are enabled when you click a SPEC cell in
[SEGMENT DECODE TABLE].
Selects LCD segment output.
Selects DC-complementary output.
Selects DC-Pch open-drain output.
Selects DC-Nch open-drain output.
Selects segment/common shared output.
[Delete] button
Clears one selected segment assignment.