Filter
Top Products
CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 235
(S1C63 FAMILY ASSEMBLER PACKAGE)
xdp/xdps (xilinx fpga data dump)
Function
This command displays the content of the FPGA on the standard peripheral circuit board to the
[Command] window in a 16 words/line hexadecimal dump format.
Format
>xdp <address1> [<address2>]↵ for main FPGA (direct input mode)
>xdps <address1> [<address2>]↵ for sub FPGA (direct input mode)
<address1>: Start address to display; hexadecimal
<address2>: End address to display; hexadecimal
Condition: 0 ≤ address1 ≤ address2 ≤ FPGA end address
Examples
If only <address1> is defined, the debugger displays data for 256 words from <address1>.
>xdp 0↵
Addr +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
00000: FF 84 AB EF F9 D8 FF BB FB BB BF FB BF BF FB BF
00010: BB FB BB BF BB BF FB BB BF BF FB BB FF EE FF EE
00020: EF FE D7 FB FE EE EF EF EE EE FE EE FB FE EF EF
: : :
000E0: FF FF FF FF FB FF FF FF BD DF FB FD DF FF FF FF
000F0: FF FF BF FF FF FF FF F9 FF FF FF FF FF FF FF FF
>
If both <address1> and <address2> are defined, the debugger displays data from <address1> to
<address2>.
>xdp 100 100↵
Addr +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
00100: FF
>
Notes
•An error results if the specified address is not a hexadecimal number.
Error : invalid value
• An error results if the start address is larger than the end address.
Error : end address < start address
GUI utility
None