Filter
Top Products
CHAPTER 8: DEBUGGER
232 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
8.9.20 FPGA Operation
xfer/xfers (xilinx fpga data erase)
Function
This command erases the contents of the FPGA on the standard peripheral circuit board inserted in
the ICE.
Format
>xfer↵ for main FPGA (direct input mode)
>xfers↵ for sub FPGA (direct input mode)
Example
>xfer↵
>
After the command is entered, a dialog box appears to select start or cancel erasing.
Notes
•A dialog box appears to show the progress of erasing while executing. To abort erasing, click the
[Cancel] button on the dialog box or press the [ESC] key. When the execution stops, the warning
message shown below is displayed.
Warning : User cancel
In this case, the standard peripheral circuit board cannot be used until the FPGA is erased and
reprogrammed.
• Erase time is about 2 minutes 40 seconds (max.) when the transfer rate between the ICE and PC is
38400 bps.
• Do not erase the sub FPGA unless otherwise specified, as it normally contains some LCD functions.
GUI utility
None