Filter
Top Products
CHAPTER 9: FUNCTION OPTION GENERATOR
S5U1C63000A MANUAL EPSON 241
(S1C63 FAMILY ASSEMBLER PACKAGE)
9.3 Using winfog
9.3.1 Starting Up
Startup from Explorer
Double-click on the winfog.exe icon or select winfog from the start menu.
If the device information definition file (s1c63xxx.ini) was loaded into your computer
during previous execution, winfog automatically reads the same file as it starts.
Alternatively, drag the Device information definition file icon into the winfog.exe icon to
start winfog, which will then read the Device information definition file.
Startup by command input
You can also start winfog from the MS-DOS prompt by entering the command shown below.
>winfog [s1c63xxx.ini]
denotes entering the return key.
You can specify the device information definition file (s1c63xxx.ini) as a command option. (You can
also specify a path.) When you specify the device information definition file here, winfog reads it as it
starts. This specification can be omitted.
When winfog starts, it displays the [FOG] window. The following diagrams show a [FOG] window when
the device information definition file has been loaded and when it has not.
[FOG] Window (initial screen)
[FOG] Window (after reading the device information definition file)