Epson S5U1C63000A Computer Accessories User Manual


 
CHAPTER 10: SEGMENT OPTION GENERATOR
250 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
Segment option HEX file (zzzzzzzz.ssa)
This is the Motorola S2 format file necessary to set the selected segment options in the ICE. When you
debug programs with the ICE, download this file into the ICE using debugger db63 commands.
Segment assignment data file (zzzzzzzz.sad)
This is a text format file in which segment assignment data is stored. Create this file when terminating
winsog before finishing segment assignment. You can continue option setting next time by loading
this file to winsog.
1 The "xxx" in the file name denotes the model name of a microcomputer. For the "zzzzzzzz" part, any
given file name can be specified.
2 For details on how to download mask options into the ICE, refer to Chapter 8, "Debugger".
10.3 Using winsog
10.3.1 Starting Up
Startup from Explorer
Double-click on the winsog.exe icon or select winsog from the start menu.
If the device information definition file (s1c63xxx.ini) was loaded into your computer
during previous execution, winsog automatically reads the same file as it starts.
Alternatively, drag the device information definition file icon into the winsog.exe icon to
start winsog, which will then read the device information definition file. If a function option
document file is required for setting the segment option, a dialog box will appear to allow
file selection. In this case enter the file name including the path in the text box or choose the
file from the dialog box that appears by clicking on the [Ref] button.
Startup by command input
You can also start winsog from the MS-DOS prompt by entering the command shown below.
>winsog [s1c63xxx.ini]
denotes entering the return key.
You can specify the device information definition file (s1c63xxx.ini) as a command option. (You can
also specify a path.) When you specify the device information definition file here, winsog reads it as it
starts. If a function option document file is required for setting the segment option, the file
(zzzzzzzz.fdc) must be prepared in the directory in which s1c63xxx.ini and winsog.exe exist before
entering the command. When the command is entered, a dialog box will appear to allow file selection.
Enter the file name including the path in the text box or choose the file from the dialog box that
appears by clicking on the [Ref] button. This specification can be omitted.