Filter
Top Products
CHAPTER 8: DEBUGGER
194 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
Notes
• The maximum number of times a program can be executed is 4,095. Specifying a pass count exceeding
this limit will result in an error.
Error : Number of passes out of range, use 0-4095
• The addresses must be specified within the range of the program memory area available for each
microcomputer model.
An error results if the input one is not a hexadecimal number or a valid symbol.
Error : invalid value (no such symbol / symbol type error)
An error results if the limit is exceeded.
Error : Address out of range, use 0-0xXXXX
GUI utility
[Break | Sequential Break …] menu item
When this menu item is selected, a dialog box appears for setting sequential break conditions.
To set a sequential break, enter sequential addresses and a
pass count in the text boxes, then click [OK]. At least one
address (Address 1) and the pass count must be set.
To clear the sequential break condition, click [Clear].