Filter
Top Products
CHAPTER 8: DEBUGGER
186 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
bc / bpc (break point clear)
Function
This command clears the specified breakpoints that have been set.
Format
>bc [<break1> [ . . .<break16>]]↵ (direct input mode)
<break1–16>: Break address; hexadecimal or symbol (IEEE-695 format only)
Examples
>bp↵
1: 0116 ... Breakpoints that have been set.
2: 0200
3: 0260
1. set 2. clear 3. clear all ...? ↵
>bc 200↵ ... Clears breakpoints at address 0x0200.
>bp↵
1: 0116
2: 0260
1. set 2. clear 3. clear all ...? ↵
>bc↵ ... Clears all breakpoints.
>bp↵
No PC break is set.
1. set 2. clear 3. clear all ...? ↵
>
Notes
• The bc and bpc commands have the same functions.
• If no address parameter is specified, all the breakpoints that have been set are cleared.
• The format of parameters is same as the bp command. You can also use the guidance input mode of bp
command to do the same operation.
•You can use this command for multiple times to clear breakpoints.
•An error results if an address that is not set at a breakpoint is specified.
Error : Input address does not exist
GUI utility
[Break | Breakpoint Set …] menu item
When this menu item is selected, a dialog box appears for clearing breakpoints. (See the bp com-
mand.)
[Break] button
When this button is clicked after placing the cursor to a break address line in the [Source] window, the
breakpoint is cleared. If the address has not been set as a breakpoint, this button sets a new breakpoint
at the address.
[Break] button