Epson S5U1C63000A Computer Accessories User Manual


 
CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 209
(S1C63 FAMILY ASSEMBLER PACKAGE)
8.9.13 Flash Memory Operation
lfl (load from flash memory)
Function
This command loads the memory contents from the flash memory of the ICE into the target memory.
It therefore allows you to debug the program beginning from the contents previously saved to the
flash memory up to latest one.
Format
(1) >lfl <content> [ ... <content>] (direct input mode)
(2) >lfl (guidance mode)
Read program 1. yes 2. no ...? <1 | 2>
data 1. yes 2. no ...? <1 | 2>
fog1. yes 2. no ...? <1 | 2>
sog 1. yes 2. no ...? <1 | 2>
mla 1. yes 2. no ...? <1 | 2>
Loading ...
>
<content>: Data type; p (program) / d (data) / f (fog) / s (sog) / m (mla)
Examples
Format (1)
>lfl p ...Loads program data.
Loading from flash memory ... done!
Format (2)
>lfl
Read program 1.yes 2.no ...? 1 ...Select the contents to be loaded.
data 1.yes 2.no ...? 1
fog 1.yes 2.no ...? 1
sog 1.yes 2.no ...? 1
mla 1.yes 2.no ...? 1
Loading from flash memory ... done!
>
Notes
If the flash memory is protected against read/write, an error will result and memory contents will not
be loaded into the target memory.
Error : flash ROM is protected
If the flash memory has been erased, an error will result and memory contents will not be loaded into
the target memory.
Error : format error