Filter
Top Products
CHAPTER 12: MASK DATA CHECKER
S5U1C63000A MANUAL EPSON 285
(S1C63 FAMILY ASSEMBLER PACKAGE)
2. Select the files to be entered.
[Pack Input Files] lists the files of the type specified in the device information definition file by
their default file names. If the data files to be entered are represented by different names in this
list, replace the file names following the procedure below.
a. Select a file name to be changed by clicking on it from the list box.
b. Click the [Ref] button and select the data file to be entered.
Do this for all files listed.
When replacing files, take care not to mistake one file for another. If the input file is erroneous, an
error will result during file packing.
3. Setting output file names
In the [Pack Output File] text box, specify a pack file name in which you want the mask data to be
output. The file name displayed by default can be modified. You can use the [Ref] button to look at
other folders.
Make sure the extension of the output file name is ".pa0". If after presenting data to Seiko Epson,
you present new data due to program bugs or any other reason, increase the number in the last
digit of the extension in increments of one. For example, the extension of the second file presented
should be "c63xxx··yyy.pa1".
Note: File name specification is subject to the following limitations:
1. The number of characters that can be used to specify a file name including the path is 2,048.
2. The file name itself (not including the extension) can be up to 15 characters, and the extension
up to three characters.
3. The file name cannot begin with a hyphen (-), nor can the following symbols be used as part of
directory names (folder names), file names, and extensions:
/ : , ; * ? " < > |
4. Click the [Pack] button to execute packing.
When winmdc has completed packing, it dsiplays a message "Packing completed!" in the [Pack
message] text box. If an error has occurred, an error message is displayed.
5. Click the [Cancel] button to close the dialog box.
Alternatively, you can click the [Cancel] button to quit winmdc before it executes packing.