Filter
Top Products
CHAPTER 10: SEGMENT OPTION GENERATOR
S5U1C63000A MANUAL EPSON 255
(S1C63 FAMILY ASSEMBLER PACKAGE)
Once a device information definition file is selected, the same file is automatically loaded the next
time you start winfog.
If a function option document file is required for setting the segment option, the dialog box shown
below will appear to allow file selection. In this case enter the file name including the path in the text
box or choose the file from the dialog box that appears by clicking on the [Ref] button.
Date
Displays the current date. Change it as
necessary.
Segment Option Document file
Specify the segment option document file
name you want to create. The file name
displayed by default can be modified. You
can use the [Ref] button to look at other
folders.
Segment Option HEX
Do you make hex file?
Select whether to create a segment option
HEX file. You need to create one when you
use the ICE to debug programs.
Segment Options HEX file
When you create a segment option HEX file,
specify its file name here. The file name
displayed by default can be modified. You
can use the [Ref] button to look at other
folders.
Note: When you load a device information definition file after setting up options, all settings are reset to
the default state.
(2) Setup
Select [Setup] from the [Tool] menu or click the [Setup] button to bring up the [Setup] dialog box.
From this dialog box, select items and enter data.
[Setup] button