Filter
Top Products
CHAPTER 8: DEBUGGER
230 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
Format
(1) >md <option> <num> [ ... <option> <num>]↵ (direct input mode)
(2) >md↵ (guidance mode)
Current settings
On the fly interval 0 - 5 times/sec ...?
Current setting
: <0 ... 5>↵
Counter unit 1. time 2. cycle ...?
Current setting
: <1 | 2>↵
Interrupt at step 1. allowed 2. not allowed ...?
Current setting
: <1 | 2>↵
Step display mode 1. each 2. last ...?
Current setting
: <1 | 2>↵
Counter mode 1. reset 2. hold ...?
Current setting
: <1 | 2>↵
Illegal instruction 1. check 2. no check ...?
Current setting
: <1 | 2>↵
Cmw wait time 1 - 256 s ...?
Current setting
: <1 ... 256>↵
>
<option>: <num>:
-f (on the fly interval) 0–5 times/sec
-u (couter unit) 1. Time 2. Cycle
-i (interrupt at step) 1. Allowed 2. Not allowed
-s (step display mode) 1. Each 2. Last
-c (counter mode) 1. Reset 2. Hold
-il (illegal instruction) 1. Check 2. No check
-cm (cmw wait time) 1–256 sec
Examples
>md -u 1↵ ...Sets the execution cycle counter in time measurement mode.
>md↵
On the fly interval : 2 times/sec
Counter unit : time
Interrupt at step : not allowed
Step display mode : each
Counter mode : hold
Illegal instruction : check
Cmw wait time : 1 s
On the fly interval 0 - 5 times/sec ...? 2 times/sec : 5↵
Counter unit 1.time 2.cycle ...? time : 2↵
Interrupt at step 1.allowed 2.not allowed ...? not allowed : 1↵
Step display mode 1.each 2.last ...? each : 2↵
Counter mode 1.reset 2.hold ...? hold : ↵
Illegal instruction 1.check 2.no check ...? check : ↵
Cmw wait time 1 - 256 s ...? 1 s : 3↵
>
Notes
• The actual interval of the on-the-fly display is obtained from the expression below.
(1 [sec] / Count set) + (Overhead of the PC, RS232C interface and ICE [sec]) = display interval [sec]
The overhead varies depending on the performance of the PC and baud rate of the RS232C interface.
Be aware that there is a 0.05 sec to 0.1 sec overhead in this system.
• In guidance mode, the following keyboard inputs have special meaning:
"q↵"… Command is terminated. (finish inputting and start execution)
"^↵"… Return to previous item.
"↵"… Input is skipped. (keep current value)