Filter
Top Products
CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 205
(S1C63 FAMILY ASSEMBLER PACKAGE)
(3) During log output
If the command execution result is output to a log file as specified by the log command, code is
displayed in the [Command] window and its contents are output to the log file also.
If the [Source] window is closed, code is displayed in the same way as in (2) above.
If the [Source] window is open, the window is redisplayed. In this case, the same number of lines is
displayed in the [Command] window as displayed in the [Source] window.
(4) Successive display
If you execute the m command after entering it from the keyboard, code can be displayed successively
by entering the [Enter] key only until some other command is executed.
When you press the [Enter] key, the [Source] window is scrolled forward one screen.
When displaying code in the [Command] window, 16 lines of code following the previously displayed
address are displayed (the same number of lines as displayed in the [Source] window if the m com-
mand is executed during log output).
Notes
• Source codes can be displayed only when an absolute object file that contains source debug informa-
tion has been loaded.
• The display start address you specified must be within the range of the program memory area
available with each microcomputer model.
An error results if the input one is not a hexadecimal number or not a valid symbol.
Error : invalid value (no such symbol / symbol type error)
An error results if the limit is exceeded.
Error : Address out of range, use 0-0xXXXX
GUI utility
[View | Program | Mix Mode] menu item, [Mix] button
When this menu item or button is selected, the [Source] window opens or activates and displays the
program from the current PC address.
[Mix] button