Filter
Top Products
CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 145
(S1C63 FAMILY ASSEMBLER PACKAGE)
(3) Rewriting specified area
An entire specified area is rewritten with specified data.
(4) Copying specified area
The content of a specified area is copied to another area.
(5) Monitoring memory
Four memory locations, each with area to store 4
consecutive words, can be registered as watch
data addresses. The registered watch data can be
verified in the [Register] window. The content of
this window is updated in real time at 0.5-second
intervals by the on-the-fly function. Addresses 0,
4, 8, and C are made the watch data addresses by
default.
The memory content displayed
at the left indicates data at a
specified address, and the one
displayed at the right indicates
4-word data at the high-order
address.
Monitor data
Operating registers
The following operations can be performed on registers:
Table 8.8.3.3 Commands/menu items to operate registers
Function Command Menu
Displaying registers rd [View | Register]
Modifying register values rs –
(1) Displaying registers
Register contents can be displayed in the [Register] or [Command]
window.
Registers: PC, A, B, X and [X], Y and [Y], F, SP1, SP2, EXT, and QUEUE
While the program is being executed, the PC address and F register are
updated in real time every 0.5 seconds by the on-the-fly function.
(2) Modifying register values
The contents of the above registers can be set to any desired value.
The register values can be directly modified on the [Register] window.
Displaying option data
Option data in the ICE option areas (function option data, segment option data, or melody data). Data
is displayed in the [Command] window in hexadecimal dump format.
Table 8.8.3.4 Command to display option data
Function Command
Displaying option data od