Filter
Top Products
Serial-port- or USB-port-connected firmware upload
10
Figure 59. Extron Firmware Loader Window
10. Select the MTPX Plus switcher and click File > Open. The Choose Firmware File screen
appears (see figure 60).
11
11
Figure 60. Choose Firmware File Window
11. Navigate to and select the new firmware file. Click Open. The Choose Firmware File
window closes.
CAUTION: The firmware file must have an .s19 extension. Other file types can cause
the switcher to stop functioning.
NOTES: • When downloaded from the Extron website, the firmware is placed in a
subfolder of C:\Program Files\Extron\Firmware.
• The original factory-installed firmware is permanently available on the
matrix switcher. If the attempted firmware upload fails for any reason, the
switcher reverts to the factory-installed firmware.
MTPX Plus Series • Matrix Software 110