Filter
Top Products
Configuration Worksheets
Rather than trying to remember the configuration for each preset, use worksheets to
record this information. Make copies of the blank worksheet on page 71 (32-input button
and -output button switchers) and page 72 (16-button and 12-button switchers) and use
one for each preset configuration. Cross out all unused or inactive inputs and outputs. Use
different colors for video and audio.
NOTE: All of the equipment in the following examples is connected through the
appropriate MTP transmitter or receiver.
Worksheet Example 1: System equipment
Figure 44 shows a portion of a worksheet for an MTPX Plus 1616 in a fictional organization
with the system hardware annotated. Inputs 10, 11, and 13 have no connection in this
organization, so they are crossed out on the worksheet. Similarly, outputs 7 and 9 through
16 are crossed out.
1 2345678
12345678
91011
11
12 13
10
9
Input sources
Output destinations
Preset # Title: Video: Audio:
Fill in the preset number and use colors, dashes, etc., to make connecting lines.
Indicate if the configuration is for video, audio, or both.
Classroom
#1 VCR
USP 405
Audio
CD
PC 2
RGB 202
PC 1
RGB 202
Weekly status mtg 3
Camera
#2
Camera/
mic - Main
podium
Main hall
FP #1
Main hall
FP #2
Podium
monitor
Sound
system
#1
Sound
system
#2
VCR
(VSC 500)
DA 6
Classroom
#2 VCR
USP 405
Laptop
RGB 202
Rack DVD
(USP 405)
VTG 300
Figure 44. Worksheet Example 1: System Equipment
Inputs include PCs, an audio CD player, cameras, and an Extron VTG 300. Output devices
include monitors, projectors, a stereo, and a VCR for recording presentations.
The VTG 300 video test generator connected to input 12 enables a video test pattern to be
sent to one, several, or all output devices for problem isolation or adjustment purposes. An
audio test tape or CD could be used in a similar manner to check out the audio components.
MTPX Plus Series • Operation 68