Filter
Top Products
I/O Settings Page
The I/O Settings page provides a way to set the input audio gain and attenuation and the
output volume. Access the I/O Settings page (see figure 88) by clicking the I/O Settings
link on the Control page.
Picture Settings
Set and View Ties
Refresh
Global Presets
MTPX Configuration
Figure 88. I/O Settings Page
Changing the input gain and attenuation
Users can set the level of audio gain or attenuation (-18 dB to
+24 dB) of each input from the I/O Settings page. Audio levels
can be adjusted so there are no noticeable volume differences
between sources.
Change the gain and attenuation setting for an input as
follows:
1. Click the Input Audio Level drop box for the desired input.
A drop-down scroll box appears.
2. Click and drag the slider or click on the scroll up button
or the scroll down button until the desired value is
visible.
NOTE: As an alternative to steps 1 and 2, or to listen
to the audio as you make adjustments, click on
the up button or down button.
MTPX Plus Series • HTML Operation 142