Filter
Top Products
X1% = TP output number 01
–
(
maximum number of TP outputs for your model)
X1^ = Local video output number 1 or 2
NOTE:
X1^
is applicable to MTPX Plus 128 and matrix sizes 1632 and larger only.
X1& = Local output sync polarity 0 = H- / V- (default) 3 = H+ / V+
1 = H+ / V- 4 = No sync processing (composite, S-video, YUV)
2 = H- / V+
X1* = Local audio output number 1 – 2 (MTPX Plus 128)
1 – 4 (other matrix sizes 1616 and smaller)
1 – 8 (matrix sizes 1632 and larger)
X1( = Volume adjustment range 0 – 64 (1 dB/step except for 0-to-1, which is 13 dB) (default = 64 [0 dB])
(See the table on page 84.)
X2) = Audio gain 0 – 24 (1 dB/step)
X2! = Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X2@ = Audio attenuation 1 – 18 (1 dB/step)
X2# = Global or room preset # 00 - 32 (global) or 00-10 (room) (0 = current conguration)
NOTE: A Room preset is a stored configuration with all of the outputs assigned to a single room. When a room preset is recalled from
memory, it becomes the current configuration.
X2$ = Name 12 characters maximum for input, output, and global preset names
11 characters maximum for room preset names
Upper- and lower-case alphanumeric characters and
_ / and spaces are valid.
NOTE: The HTML language reserves certain characters for specific functions (see “Special Characters“ on page 95).
X2% = Room # (for room presets) 10 max. (each can have up to 10 presets (X2#s) assigned)
NOTE: A Room is a subset of operator-selected outputs that relate to each other. The MTPX Plus switchers support up to 10 rooms, each of
which can consist of from 1 to 16 outputs.
X2^ = Group # (for I/O grouping) 1 through 4 groups (0 = no group)
X2& = Audio or RS-232 mute: 0 = no mutes 2 = audio or RS-232 mute
X2* = Local input select DIP switch status 0 = RJ-45 position 1 = local input position
X2( = Number of inputs 8, 12, 16, or 32
X3) = Number of outputs 8, 16, or 32
X3! = Part number 60-nnn-nn or 60-nnnn-nn
X3@ = Firmware version number to second decimal place (x.xx)
X3# = Verbose rmware version-description-upload date/time (see the Query firmware version (verbose) command on page 91).
X3$ = Voltage Positive or negative voltage and magnitude
X3% = Internal temperature Degrees Fahrenheit
X3^ = Fan speed RPM
MTPX Plus Series • Programming Guide 79