Filter
Top Products
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 104
Mic volume
Mic volume adjusts the listening level of the mic mix (the blend of the individual
microphones) while maintaining the relative individual levels (see Mic mix levels on
page 103). The Mic Volume fader has a range of -100 dB to 0 dB. It also includes soft limit
handles to adjust the minimum and maximum allowable range (highlighted in blue).
To adjust the mic volume:
1. Click the Mix Controls tab (see figure 72,
1
on page 103).
2. Adjust the level using any of the following methods (
4
):
• Click and drag the fader handle to the desired level.
• Click the fader handle and press the <Up Arrow> or <Down Arrow> key to
respectively increase or decrease the level in 1 dB increments (PCS only).
• Click the fader handle and press the <Page Up> or <Page Down> key to
respectively increase or decrease the level in 10 dB increments (PCS only).
• Click in the level text field below the fader and enter a new value. Then, press the
<Enter> or <Tab> key to apply the change.
• Click the Up or Down arrow button to the right of the level text field to respectively
increase or decrease the level in 0.1 dB increments.
3. If desired for the Mic Volume fader, click and drag the minimum and maximum soft
limits to define new minimum and maximum values within the original range.
4. To mute the microphone inputs, click the Mute button (
5
) below the Mic Volume fader.
Program volume
Program volume adjusts the listening level of the program source, independent of the mic
volume. The Program Volume fader has a range of -100 dB to 0 dB. It also includes soft
limit handles to adjust the minimum and maximum allowable range (highlighted in blue).
NOTE: Listening to the audio throughout the process of setting the program volume
may be required for setting a nominal output level.
To adjust the program volume:
1. Click the Mix Controls tab (
1
).
2. Adjust the level using any of the following methods (
6
):
• Click and drag the fader handle to the desired level.
• Click the fader handle and press the <Up Arrow> or <Down Arrow> key to
respectively increase or decrease the level in 1 dB increments (PCS only).
• Click the fader handle and press the <Page Up> or <Page Down> key to
respectively increase or decrease the level in 10 dB increments (PCS only).
• Click in the level text field below the fader and enter a new value. Then, press the
<Enter> or <Tab> key to apply the change.
• Click the Up or Down arrow button to the right of the level text field to respectively
increase or decrease the level in 0.1 dB increments.
3. If desired for the Program Volume fader, click and drag the minimum and maximum
soft limits to define new minimum and maximum values within the original range.
4. To mute the program volume, click the Mute button (
7
) below the Program Volume
fader.