Filter
Top Products
IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 49
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Input Configuration Commands
Input video format
Set video format
X!*X# \ TypX!*X#] Set input X! to format X#.
View set format
X!\ X#]
View the video format.
Input EDID
Assign EDID to input
EAX!*X6) EDID} EdidAX!*X6)] Assign EDID X6) to input X!.
View assigned EDID
EAX! EDID} X6)] View the EDID for input X!.
Save an output EDID to
custom slot
ESX@*X6) EDID} EdidSX@*X6)] Save output X@ EDID to X6)
(3-8, 201, 202).
Export EDID file
EEX6),<filename>EDID} EdidEX6)] Export X6) (1-92, 201, 202)
EDID.
Import EDID file
EIX6),<filename>EDID} EdidIX6)] Import X6) (3-8, 201, 202)
EDID.
NOTES:
• EDID import and export commands use the device user file system to hold an EDID file. Use IP Link File
Manager (download IP Link File Manager from the Extron website) to move EDID files between a PC and
the device user file system.
• <filename> can optionally carry a full path name on the device user file system.
• EDID files must have an file extension of .bin, carrying 128 or 256 bytes of binary data.
• Exporting a default EDID table (for an X5( value of 10 or greater) results in the HDMI LPCM-2Ch table
being exported.
Input name
Write input name
EX!,X1$NI} NmiX!,X1$] Rename input X!.
View input name
EX!NI} X1$] View the name of input X!.
NOTE: To clear an input name, enter a single space character for X1$. This resets the input name to the
default.
NOTES:
X! = Input selection
1-6 (IN1606) or 1-8 (IN1608 Series)
X@ = Output selection
1 = HDMI A (top connector)
2 = HDMI B (bottom connector)
3 = Out C
X# = Input video format
1 = RGB (default for inputs 1 and 2)
2 = YUV
3 = RGBcvS
4 = S-video
5 = composite
6 = HDMI (default for inputs 3 and higher)
X1$ = Input name (text label)
Up to 16 characters
X6) = EDID emulation See the X6) definition on page 47.