Filter
Top Products
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 86
Configuration Pages
The configuration pages contain options for input and output configuration, EDID
management, image settings, image size and position, audio configuration, preset
management, and device settings.
Figure 58. Global Navigation Bar - Configuration
Input and Output Configuration Page
Click the Input/Output Config icon (see figure 58,
2
) on the Global Navigation Bar
to open this page. It contains panels for input configuration and output configuration.
Input Configuration panel
The Input Configuration panel consists of user configurable fields for each input. These
include input naming, signal type, aspect ratio, automatic Auto-Image, Auto Memory, HDCP
Authorized status, and Film Detect.
Figure 59. Input Configuration Panel (IN1608)
NOTE: DTP inputs 7 and 8 are not available on the IN1606.
Input (renaming)
By default, the name associated with an input channel is Input <number>. To rename an
input, click inside the desired input field (see figure 59,
1
) and type in the desired name to
identify the input. Input names have a 16-character limit.
NOTE: Entering a single space character resets the name of the input to the default.
Signal type
From the Signal Type drop-down menu (see figure 59,
2
), select the signal type for
inputs 1 and 2 from RGB (default), YUV, RGBcvS, S-Video, and Composite. For all other
inputs, HDMI/DVI is the only available signal type.