Filter
Top Products
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation 25
On-Screen Display (OSD) Menu System
The OSD menu is used primarily for the initial setup of the device (for other methods of
control, see Control Methods on page 10). The OSD menu presents configuration options
on a local monitor and can be adjusted with front panel controls.
NOTE: The OSD menu has a fixed time-out of 60 seconds.
Menu Navigation Using Front Panel Controls
Menu button — Press the Menu button to activate or exit the OSD menu, deselect a
submenu, or cancel a pending change.
Enter button — Press the Enter button to activate the OSD menu, select submenus or
submenu items, or accept pending changes.
Navigation buttons — Press the
Up (
>
) button or the Down (
<
) button to navigate
submenus or submenu items. Press the Right (
>
) button to access currently selected
submenus or submenu items. Press the Left (
>
) button to exit currently selected
submenus or submenu items. Also use the navigation buttons to adjust settings according
to specific setting directions.
Input selection buttons — Press any of the Input selection buttons to change the
selected input.
Menu Overview
In the OSD menu, the IP address and firmware version are displayed in the top border. The
active input settings and output resolution are displayed in the bottom border. The OSD
menu contains nine submenus with various submenu items of adjustable settings or device
information (see the table below). Use the Menu, Enter, and navigation buttons to navigate
the OSD menu.
Submenus Submenu Items
Quick Setup Auto-Image Input Format EDID Output
Resolution
Audio Mute Test Pattern DHCP
Mode
IP Address
User Presets Recall Save Clear
Picture Controls Image
Position
Image Size Brightness/
Contrast
Color/Tint Detail
Input Auto-Image Input Format Film Mode Horizontal/
Vertical Start
Horizontal/
Vertical
Active
Total Pixels/
Phase
HDCP
Authorization
EDID
Output Resolution HDMI “A”
Format
HDMI “B”
Format
Out “C”
Format
(IN1608)
HDCP
Notification
Audio Audio Mute Audio Format Gain Mic/Line
1 Gain/
Phantom
Mic/Line
2 Gain/
Phantom
Mic/Line
Volume
Program
Volume
Output 1/2
Format
Advanced Test Pattern Screen
Saver/
Timeout
Auto-Image Aspect Ratio Auto Memory Overscan Auto Switch Factory
Reset
Communication Remote Port MAC
Address
DHCP IP Address Subnet Mask Gateway
Device Info
(Read Only)
Unit Name Firmware Temperature Active Input
Details
Active Output
Details
Detected
Displays
NOTE: The Communication submenu is normally locked. Press and hold the Enter
button for 10 seconds to unlock the submenu items.