Filter
Top Products
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 113
To clear a preset:
1. Select the input preset or user preset (see figure 79,
1
on page 112) to be cleared.
2. Click the Clear button (see figure 79,
4
) located in the same section of the screen. A
confirmation dialog box opens.
3. Click the Clear button to erase saved data or click the Cancel button to return to the
Preset Management page.
To rename a preset:
1. Double-click a Preset Name or right-click a Preset Name (see figure 79,
1
) and
select Rename.
2. Enter a new preset name and press the <Enter> key.
Device Settings Page
The Device Settings page allows configuration of screen saver settings, auto switch
modes, HDCP notifications, video and sync muting, on-screen display timeout, and HDCP
modes. Click the Device Settings icon (see figure 58,
8
on page 86) on the Global
Navigation Bar
to open the Device Settings page.
Figure 80. Device Settings Page
Screen Saver panel
When no active video is detected on the selected input, the screen saver mode is activated.
The output sync can be disabled after a user-set duration, which allows display devices to
go into a low power, standby state.
1. Click one of the radio buttons (see figure 80,
1
) to select a display when the screen
saver is enabled.
• Black — Mutes video output to black for a set duration before disabling output
sync (default).
• Blue with On Screen Display (OSD) Bug — Displays a blue background with
a moving OSD message that indicates “<scaler model>: Input <number> No
Signal
” for a set duration before disabling the output sync.