Filter
Top Products
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation 38
Communication Submenu
Figure 28. Communication Submenu (IN1608)
The Communication submenu displays RS-232 settings, current IP configuration (DHCP
mode, IP address, Subnet mask, and Gateway address), and MAC address.
Press and hold the Enter button for 10 seconds to edit the submenu items listed below.
Remote Port — Displays the baud rate for the serial RS-232.
MAC Address — Displays the MAC address of the device (read only).
DHCP Mode — Press the navigation buttons to turn the DHCP mode on or off. The default
is Off.
IP Address — Press the Left and Right buttons to select an octet of the IP address.
Press the Up and Down buttons to adjust the value of the selected octet. The default is
192.168.254.254.
Subnet Mask — Press the Left and Right buttons to select an octet of the subnet mask
address. Press the Up and Down buttons to adjust the value of the selected octet. The
default is 255.255.0.0.
Gateway — Press the Left and Right buttons to select an octet of the gateway address.
Press the Up and Down buttons to adjust the value of the selected octet. The default is
0.0.0.0.